OF COLD STAMPING GLUE LMI

Technical Info - PDF

DOWNLOAD

Description

067839 OF Cold stamping glue LMI

 

Application

Cold stamping in conventional offset Packagings of odour and taste sensible fi llings

 

Printing substrates

All papers and carton boards which are suitable for the packaging printing.

 

Properties

• low migration

• good printablility

 

Processing notes

The cold stamping glue LMI is printed like an offset printing ink from the ink unit. In the next working step the fi lm layer of the cold stamping foil is separated from the carrier fi lm and is adhering at the printed spots. The appropriate choice of cold stamping foils should be made in accordance with the supplier of the foils. The applied quantity of varnish and the stamping speed depend on the substrate. Printability tests are recommended - especially when the substrate is unknown.

 

Our performance

100% ink quality - and for environment‘s sake. J+S offer fi rst quality inks manufactured without harming the environment.

 

Your service

Our competent customer service is always at your disposal. Test our quality and be convinced!

 

Application

The OF Cold stamping glue LMI is recommended for manufacturing of food- or pharmaceutical packagings. It is formulated under consideration of its application in a way that a potential migration through the substrate as well as a migration in the roll or stack by set-off from the printed exterior side to the side facing the food is as minimal as possible. Attention should be paid to the fact that migration and migration by proof are also depending on the conditions of process and on the suffi cient barrier properties of the substrate. Low odour and migration properties were respected during the formulation. This varnish is only suitable for indirect food contact.

 

The varnish is in general suitable for the following food packaging:

• Smell- and taste-sensitive food of any kind

• solid, paste-like or liquid, greasy or aqueous food

 

Restricted application

The OF Cold stamping glue LMI is not permitted for direct food contact. Furthermore the application for food packagings which are destined for microwave or oven application is only recommended if there are existing analysis which are specially aligned with this application field.

 

Production and composition

The above indicated product is manufactured in accordance with the “Good practice of production of printing inks for packaging to be used on the surface which is averted from the food or object (GMP)” and according to the EuPIA-guidelines produced.

 

Adherence to directives

The manufacturer of the fi nished end-product and the packer have the legal responsibility regarding the suitability of the food packaging for the destined application.

 

Note

We recommend the inspection of the manufactured food packaging by an approved institute and we point out that not only the used material but also the production process has an infl uence on the conformity of a packaging.

 

Disclaimer

The information contained herein is based upon data believed to be up-to-date and correct at the time of writing. It is provided to our customers (and/or Analytical Contractors) in order that they are able to comply with all applicable health and safety laws, regulations, and orders. In particular, customers are under an obligation to carry out a risk assessment under relevant Good Manufacturing Practices (GMP) in-line with EU food contact legislation and as a result take adequate risk management measures to protect food consumers. Since the application and conditions of use are beyond our control the information provided does not represent a guarantee of any kind. The product’s performance and its suitability for the customer’s purpose depend on the particular conditions of use and the material being printed. We recommend that customers satisfy themselves that each product meets their requirements in all respects before commencing a print run. There is no implied warranty of merchantability or fi tness for purpose of the product or products described herein.

We are happy to answer your questions - whether technical or a sales type.
If you send us an email, please fill out all form fields. You can also reach us by phone.

 

Do you have anymore questions? We like to help you!

 

phone: + 49 -(0) 511 54 71 - 0  •  fax: + 49 - (0) 511 54 71 - 212  •  e-mail: infol@js-druckfarben.de

By clicking the button "Send" you agree with the following statement:

"I agree that my personal data from the contact form will be collected and processed to answer my inquiry."

The data will be deleted after processing your inquiry. Note: You can revoke your consent at any time via e-mail to datenschutz@js-druckfarben.de.

 

Further information about handling user data can be found in our privacy policy.

 

 

What is the sum of 7 and 3?